Tuesday, July 7, 2009

Game paused

I can't really work on the cabinet during the week, and I'm waiting for a bridge rectifier to arrive in the mail. Since I'm making no progress, here is a great site about someone else's Robotron restoration: http://www.biltronix.com/robotron.html

He did a much better job with the cabinet and with a web site than I'll ever do.

Once the weekend comes and I have time to work on the cabinet, the next tasks are:
  • Install the bridge rectifier and hopefully have a working power supply
  • Paint the inside of the cabinet either white or black
  • Create a new back panel out of MDF
  • Paint the back of the cabinet black
  • Sand and paint the front of the cabinet black
  • Attempt to strip the paint off the sides of the cabinet down to the wood
  • Prime the sides of the cabinet
  • Install casters on the bottom so that the cabinet can roll around

Saturday, July 4, 2009

Naked control panel

From afar the control panel looked decent. Up close it looked cancerous. The only cure for this skin cancer is to peel it off and start over. Here is the "before" picture:

Here is the "after" picture. I just started peeling at a corner and the whole thing eventually came off (leaving some of the image behind, but the image has no thickness).

In the previous picture, you can see the metal plates where the joysticks were mounted. The joysticks do not attach to the plates. They are only there so that the dust washer can be floating underneath the top of the control panel. When I removed the metal plates, there was quite a lot of dust trapped in the cavity. So much that it probably limited the joystick's movement. Too bad there is no way to clean out that dust without destroying the control panel overlay. The dust washer works better when it is mounted on top of the control panel, but I guess that was problematic in the old arcades (would people bend them?).

I ordered a new control panel overlay. Good thing they're still being made.

Cabinet mutilation

I gave the cabinet a shot of pain killer and started ripping its insides out. Since it was dead anyway, I wasted the pain killer.


I left some stuff in the cabinet because I don't intend to give it an internal paint job.

The guts are on display:

Pop a cap in that monitor

Thanks to this stupid thing called a "weekend" I can't place necessary orders for the power supply's bridge rectifier. Instead I had to risk my life removing the monitor's circuit board so that I could replace its capacitors. There are lots of warnings about getting shocked with 20,000 volts and flying backwards through a brick wall, so I had to be extra careful when discharging the monitor. But nothing impressive happened, this monitor is old enough where there was no charge left. I could've dischared it by licking the anode.

Here is the monitor's circuit board after removing it:

I didn't test the monitor after installing all the new blue capacitors. Since the monitor is out of the cabinet, I'll take this chance to remove everything from the cabinet to prepare it for sanding and painting. Pictures of that will come in the next post.

Friday, July 3, 2009

Capacitated

I got the packages of capacitors and some other goodies in the mail. Since the 12 volt output from the power board was all pooped up, I wanted to replace the capacitors before investigating any further. This seemed to work for a lot of people.

It didn't work for me. But at least I know that all of the capacitors are good (except for the big banana, which didn't get replaced).

There are six test points on the board to check for voltage. After the capacitor replacement, all of the test points were just right except for one - which ended up being 5v instead of 12v. Why!? I have no idea. But it's the point between the bridge rectifier and the banana capacitor. Maybe by replacing those two items, all will be good. In the picture below, the two thingies in question are labeled with question marks:


Since it's the weekend, I need to wait until Monday to order the two new pieces. They are special enough where they cannot be found at any store. I know, I tried.

Thursday, July 2, 2009

Picture Post

While I was standing completely still waiting for capacitors to arrive in the mail, I was thinking that I didn't post any pictures of the insides of the cabinet. Staring close at the power board or the small city doesn't help visualize how they are arranged inside of the cabinet. So this is a picture post.

Let's sing the Picture Posts theme song:

Picture Posts
Picture Posts
It's time to get your Picture Posts
It's time to get your crayons and your soldering irons...




And now the closing song:

You can play with Picture Posts
Fill your day with Picture Posts
'till Bill Cosby does another Picture Post with you!

Wednesday, July 1, 2009

Waiting for power

After installing a new power cord, the output from the small city was sort-of nearly good. A 12V output was either 10V or 20V. Or a 5V output was 9V. The 120V output to the monitor was actually 130V. Does that matter? I'll eventually find out.

I always thought the old saying was "Fun first, safety second." No need for details, but the incident involved sparks, blowing up a tool, and not wearing safety glasses. Now I think that safety comes first and a half.

The bottom right part of the power board takes in power from the small city and does some magic that I don't understand and passes out DC voltages to the other boards in the cabinet (you can see three groups of output wires). The actual DC output that I'm getting is closer to completely wrong than nearly right. Here is the power board:


All of the capacitors (technical name: round thingies) are going to get replaced, except for the big banana capacitor. Hopefully by replacing them, the DC output will be closer to almost right than mostly wrong. The order for capacitors has been placed so now all I can do is wait. There are probably other things I could be doing, but I'd rather just stand completely still for days and just wait.