Saturday, July 18, 2009

Paint a side

This is the weekend of painting. One of many I'm sure (based on how slow oil paint dries). Here is part of the coin door sprayed with Rustoleum hammered black paint. But prior to that I stripped off the old paint.

Paint stripper was used to melt off the paint from the side of the cabinet. Then I sanded it down. Then I put a few coats of primer. The primer dries really fast. Then a single coat of gray paint was added. See:

I know this isn't a perfect match to the original silver paint. But it's good enough. When I lift the cabinet up I can compare the new and old sides to see how much I screwed up.

Thursday, July 16, 2009

CPO

Hey yo the other day the control panel overlay was delivered to my door. I had to fight with my door a bit to make him hand it over. The overlay comes all rolled up so I had to flatten it. That just means put some books on it for a couple days.

Once the flattening was done, it was time to stick it to the control panel. That also means I could install the joysticks - happy day!


Those joysticks are NOT similar to the original Robotron joysticks at all. The differences are plenty:
  • These use microswitches instead of leaf switches
  • These are black instead of red
  • These are bat tops instead of ball tops
  • These are Happ instead of Wico
  • These are possible to buy cheap instead of very hard to find

One day when I happen to find a pair of Wicos, I'll replace these. Obviously there weren't Wicos installed when I got the cabinet or else they'd still be there.

Monday, July 13, 2009

Coin door explosion

I almost thought for a minute that I could leave the coin door as-is, scratches and all. That was a funny minute. After reading many web pages that explained how to restore a coin door, I had to do it myself. Step 1: Rip the sucker apart:

Step 2: Coming soon because it's a weekday and I have no free time to do more than a single step.

Note: The brand spanking new control panel overlay was delivered to my door today. Pictures of that will be delivered to this web site any day now.

Saturday, July 11, 2009

Damn that's some powerful solvent

Years ago I found an unwanted can of paint stripper. It almost became trash, but now it became useful. I want to repaint the front of the cabinet with acrylic paint, so I need to strip off the old oil-based paint. That stripper is some freaking powerful slime, good thing I didn't drink it by accident.


EDIT: Here is the cabinet after priming and painting the front black:

Casters

I put wheels on the bottom to make the thing easy to push around. Now it ain't so tough. Previously there were some levelers, but they were in bad shape and they wouldn't work well in a home setting. Also, the bottom got a crappy layer of black paint. It doesn't matter how bad it is.

Weekend time... weekend time...

USPS delivered the stencils for the sides of the cabinet. How nice of them. Actually it was nice of gamestencils.com to send them out quickly. This is $80+shipping for a single chance to paint the logo. No practice. Hope I don't screw it up.

Here's a current side, prior to stripping the paint off.


Friday, July 10, 2009

It lives! (maybe)

Well, the power supply lives. With a new bridge rectifier installed, the output voltages are all correct. But since the cabinet has been disassembled, I can't test anything. That'll have to wait until I paint the inside of the cabinet. Shouldn't be too long.